IC5 Workover Rig

  • Description
  • The IC-5 rig can be described as a complex self-propelled lifting rig, which has a driving engine joint common with the truck it is mounted on. It requires minimum preparations at the well site providing thus a high productivity of the workover operations.

    The main characteristics of the workover rig are:

Chassis type:

- TATRA 815-2PR3-28.210-6x6.2;

- motor - type T3A-929-34;

- power/rated speed: 210 kW (285.6 CP)/2,200 rot/min;

- torque: 1,030 Nm/1,400 rot/min;

- idle speed: 550-650 rot/min;

Accepted working load: 18,800 kg;

Net weight: 9,700 kg;

Total accepted weight: 28,500 kg;

Recommended working depth for 2 7/8 in tubing: 2,900 m;

Clear mast height: 16,493 m;

Ø 14 cable drum, cable length 2,250 m;

Alternate power: 151,6 CP/1086 rot/min;

Maximum lifting power during 3rd winding: 5,350 kgf;

Lifting speed of hoisting hook: 0.25-1.6 m/s;

Maximum load at hoisting hook: 28 tf;

Diameter of hoisting cable: Ø 22 mm;

Number of crane wire ropes: 6;

Speed gears at cable hoist: 2 + 2R.

  • Depending on the rig fit-out, it can perform the following operations:

- run in and pull out of hole tubing string;

- drilling of cement or sand plugs;

- works designed to start well production;

- bailing and swabbing operations;

- other well operations at depths specific to hook loads up to 28 tf.

  • Equipment available at SIRCOSS and its location according to areas of operation:

 

Location SIRCOSS

Units

Medias Services Unit

5

Mures Services Unit

6

Ploiesti Services Unit

3

  • Number of operated wells

Year

2009

2010

2011

2012

2013

2014

2015

Number of Wells

109

75

69

88

71

60

70